Inova High Performance CPU board ICP-PII Manuel d'utilisateur télécharger pdf (Page 61)

Appendix A

IPB-FPE8

CompactPCI

J11

Pin 1

A1.3 Stand-Alone IPB-FPE8

Figure A1.3 illustrates the construction of the stand-alone IPB-FPE8 piggyback and the underside

location of the J11 connector. Care should be taken to ensure that pin 1 of J11 on the CPU base

board is linked by an appropriate length of flex cable to pin 1 on the piggyback. To help with the

orientation, the connector flanks that are blue indicate the blue face of the flex-cable. Unmarked

flanks indicate the metallic connection of the flex-cable. Also, pin 1 has been highlighted by a red

triangle.

Note:

Damage to the CPU board or the

piggyback may result if the flex cable

is positioned incorrectly. Inova will not

accept responsibility for negligent

actions!

Figure A1.3 Stand-Alone Piggyback Interface IPB-FPE8

Note:

The physical connection of the IPB-

FPE8 is electrically identical regardless

of the nature of connection (stand-

alone or integrated!)

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 93 94

Pas de commentaire

Inova High Performance CPU board ICP-PII Manuel d'utilisateur Page 61